Jack Series

 

Single-line lubricators - Jack Series

 

Motor-driven lubricant dispenser - 200PSI

 

 

The most versatile product

The JACK-LUBER™ is a self-contained, microprocessor controlled, motor driven automatic lubricator.

 

The JACK-LUBER™ lubricator operates using a jack screw which pulls the piston down to the lubricant outlet. This dispenses the lubricant at a controlled rate at pressures up to 200psi. This pressure allows the JACK-LUBER™ to be used with long feed line pipework, and it can even cycle progressive distributors, allowing one JACK-LUBER™ to feed several bearings.

When one or a combination of selector switches are turned on, the unit will activate at selected intervals (see charts on page 3). At each interval, approximately 0.5 grams of grease will be delivered to the bearing. The grease output is not affected by temperature or altitude. The JACK-LUBER™ is available in 125cc or 250cc sizes and can be filled with lubricant of your choice. When the unit is empty, simply change the replaceable lubricant reservoir and battery pack.

 

Applications:

 

Single line-lubricators are designed for use in hazardous locations.

Mining & Minerals / Municipal / Manufacturing / Food & Beverage / Building Maintenance / Metals / Pulp & Paper / Agriculture / Energy

 

         

 

ATS single-line lubricator can be install on many applications;

 Stacker Cranes, Crushers, Grinders, Shakers, Bucket Elevators, Conveyors, Slurry Pumps

 Waste Water Treatment, Potable Water Plants, Incinerators

Bridge Cranes, Conveyors, Hoists, Heat Treat Furnaces, Chain Lubricators, Robots

Packaging Lines, Mixers, Washers & Dryers, Can & Bottling Lines, Ovens

Elevators & Escalators, Motors, HVAC, Air Handlers & Filters

Rolling Mills, Material Handling, Cooling Pumps, Furnace trunions and Fans

Lumber Mills, Paper and Fiberboard Mfg., Slurry Pumps, Dryers

Flour Mills, Grain Mills, Feed Mills,

Coal Handling Equipment, Drills, Pumps, Refinery Operations, Wind Turbines

Approvals 

 

Class I, Groups A, B, C, D, Div 2

Class II, Div 2, Groups F & G

Class III, hazardous locations

Specifications

 

Application: Single or Multi-point (up to 12 points)
Sizes:  125 and 250cc (4 and 8 oz.)
Technology:  Powerful mechanical fixed-displacement pump.
Jackscrew mechanism incorporated with proven Ultimate Series technology
Dispensing power:  Over 200psi. Single point can be remote mounted up to 9m. (30ft)
Distribution blocks available
Power source:  Battery pack or remote AC/DC power
Cycle:  Reusable motor drive unit and easily replaceable single-use cartridge
Lube choice Customer specified lube
Operating span:  Variable from 15 days to 2 years
Cartridge replaced as needed.
Led indicators: Tri-color LEDs to indicate normal operation, low battery.
Weaterproof:  Suitable for outdoor use in temp
range -40°C to +60°C (-40°F to +140°F)
Weathercap included
Dispensing rate:     Standard timed intervals or custom programming available

 

Accessories

 

Various high quality Accessories and Replacement parts are available from the factory. These products are always in stock and can be delivered quickly to your site. Be sure to use GENUINE ATS Electro-Lube Accessories and Replacement Parts to ensure the quality performance you have come to trust ! Contact us for further information or to place your order.

 

A team at your service!

 

 

 PRODUCT LINE

                                                                                     

 

© 2016 Allfett Solutions. All Rights Reserved.